OVERCOME EXAM CHALLENGES WITH IPASSLEADER FCP_FGT_AD-7.4 EXAM QUESTIONS

Overcome Exam Challenges with iPassleader FCP_FGT_AD-7.4 Exam Questions

Overcome Exam Challenges with iPassleader FCP_FGT_AD-7.4 Exam Questions

Blog Article

Tags: New FCP_FGT_AD-7.4 Dumps Free, FCP_FGT_AD-7.4 Top Questions, FCP_FGT_AD-7.4 Passing Score, FCP_FGT_AD-7.4 Valid Test Book, Visual FCP_FGT_AD-7.4 Cert Test

In recent years, our FCP_FGT_AD-7.4 test torrent has been well received and have reached 99% pass rate with all our dedication. As a powerful tool for a lot of workers to walk forward a higher self-improvement, our FCP_FGT_AD-7.4 certification training continue to pursue our passion for advanced performance and human-centric technology. A good deal of researches has been made to figure out how to help different kinds of candidates to get FCP - FortiGate 7.4 Administrator certification. We revise and update the FCP - FortiGate 7.4 Administrator guide torrent according to the changes of the syllabus and the latest developments in theory and practice. We base the FCP_FGT_AD-7.4 Certification Training on the test of recent years and the industry trends through rigorous analysis.

Fortinet FCP_FGT_AD-7.4 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Firewall Policies and Authentication: This topic covers how to set firewall policies, configure SNAT
  • DNAT, implement authentication methods, and deploy FSSO.
Topic 2
  • VPN: In this section, the focus is on how to configure SSL VPNs for secure network access and implement meshed or redundant IPsec VPNs.
Topic 3
  • Deployment and System Configuration: This section covers how to set up initial configurations, implement Fortinet Security Fabric, and configure an FGCP HA cluster; diagnose resources and connectivity.
Topic 4
  • Routing: This section covers how to set up packet routing with static routes and configure SD-WAN for efficient traffic load balancing.
Topic 5
  • Content Inspection: This section covers how to inspect encrypted traffic, configure inspection modes, apply web filtering, manage applications, set antivirus modes, and implement IPS for security.

>> New FCP_FGT_AD-7.4 Dumps Free <<

FCP_FGT_AD-7.4 Top Questions & FCP_FGT_AD-7.4 Passing Score

As the famous saying goes, time is life. Time is so important to everyone because we have to use our limited time to do many things. Especially for candidates to take the FCP_FGT_AD-7.4 exam, time is very precious. They must grasp every minute and every second to prepare for it. From the point of view of all the candidates, our FCP_FGT_AD-7.4 training quiz give full consideration to this problem. And we can claim that if you study our FCP_FGT_AD-7.4 study materials for 20 to 30 hours, you can pass the exam for sure.

Fortinet FCP - FortiGate 7.4 Administrator Sample Questions (Q61-Q66):

NEW QUESTION # 61
Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.)

  • A. Extended authentication (XAuth)to request the remote peer to provide a username and password
  • B. Extended authentication (XAuth) for faster authentication because fewer packets are exchanged
  • C. No certificate is required on the remote peer when you set the certificate signature as the authentication method
  • D. Pre-shared key and certificate signature as authentication methods

Answer: A,D

Explanation:
FortiGate supports both pre-shared key and certificate signature methods for IKEv1 authentication. These methods provide flexibility depending on the security requirements of the network. Additionally, FortiGate supports Extended Authentication (XAuth), which requests a username and password from the remote peer, enhancing security by adding an extra layer of authentication. The XAuth method does not necessarily make the authentication faster; it is an additional security measure.
Reference:
FortiOS 7.4.1 Administration Guide: IPsec VPN Configuration


NEW QUESTION # 62
To complete the final step of a Security Fabric configuration, an administrator must authorize all the devices on which device?

  • A. FortiManager
  • B. Root FortiGate
  • C. Downstream FortiGate
  • D. FortiAnalyzer

Answer: D

Explanation:
The correct answer is C. FortiAnalyzer.
Explanation:
In a Security Fabric configuration, after the devices are added to the Security Fabric, the final step is to authorize these devices. This authorization process is typically done through FortiAnalyzer, which manages and controls the Security Fabric. FortiAnalyzer allows administrators to centrally manage and monitor the Security Fabric, including authorizing devices to participate in the Security Fabric.
All devices must be authorized on the root Fortigate, and then after this step all must be authorized on the FortiAnalyzer.


NEW QUESTION # 63
Which three settings and protocols can be used to provide secure and restrictive administrative access to FortiGate? (Choose three.)

  • A. FortiTelemetry
  • B. Trusted authentication
  • C. HTTPS
  • D. Trusted host
  • E. SSH

Answer: C,D,E

Explanation:
To provide secure and restrictive administrative access to FortiGate, the following three settings and protocols can be used:
A. SSH (Secure Shell)
SSH is a secure protocol that allows secure remote access to the FortiGate command-line interface (CLI).
C. Trusted host
Configuring trusted hosts allows you to restrict administrative access to specified IP addresses, providing an additional layer of security.
D. HTTPS (Hypertext Transfer Protocol Secure)
HTTPS is a secure protocol that enables secure access to the FortiGate web-based graphical user interface (GUI).
So, the correct choices are A, C, and D.


NEW QUESTION # 64
Which of the following are purposes of NAT traversal in IPsec? (Choose two.)

  • A. To detect intermediary NAT devices in the tunnel path.
  • B. To dynamically change phase 1 negotiation mode aggressive mode.
  • C. To encapsulation ESP packets in UDP packets using port 4500.
  • D. To force a new DH exchange with each phase 2 rekey

Answer: A,C

Explanation:
When NAT-T is enabled on both ends, peers can detect any NAT device along the path.
If NAT is found, then the following occurs:
- Both phase 2 and remaining phase 1 packets change to UDP port 4500.
- Both ends encapsulate ESP within UDP port 4500.
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48755


NEW QUESTION # 65
Refer to the exhibit.

A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 failed to come up. The administrator has also re-entered the pre-shared key on both FortiGate devices to make sure they match.
Based on the phase 1 configuration and the diagram shown in the exhibit, which two configuration changes can the administrator make to bring phase 1 up? (Choose two.)

  • A. On HQ-FortiGate, disable Diffie-Helman group 2.
  • B. On Remote-FortiGate, set port2 as Interface.
  • C. On HQ-FortiGate, set IKE mode to Main (ID protection).
  • D. On both FortiGate devices, set Dead Peer Detection to On Demand.

Answer: C,D

Explanation:
To bring Phase 1 up, the following changes can be made:
* A. On HQ-FortiGate, disable Diffie-Helman group 2: This is incorrect because Diffie-Hellman group 2 is already selected on both devices. Disabling it would not help.
* B. On Remote-FortiGate, set port2 as Interface: This is incorrect as both sides should be consistent in their interface settings for the IPsec tunnel, and the interface is correctly set to port1 on both FortiGates in the IPsec configuration.
* C. On both FortiGate devices, set Dead Peer Detection to On Demand: This is a valid option.
Setting Dead Peer Detection (DPD) to "On Demand" helps maintain the IPsec connection by checking if the peer is still available, which can help in some cases where the connection fails due to timeouts.
* D. On HQ-FortiGate, set IKE mode to Main (ID protection): This is also a valid option because the Remote-FortiGate is already set to Main mode (ID protection). Ensuring that both ends use the same mode is crucial for successful phase 1 negotiation.
Thus, the correct answers are:C. On both FortiGate devices, set Dead Peer Detection to On Demand.D.
On HQ-FortiGate, set IKE mode to Main (ID protection).


NEW QUESTION # 66
......

As is known to us, there are best sale and after-sale service of the FCP_FGT_AD-7.4 certification training materials all over the world in our company. Our company has employed many excellent experts and professors in the field in the past years, in order to design the best and most suitable FCP_FGT_AD-7.4 Latest Questions for all customers. More importantly, it is evident to all that the FCP_FGT_AD-7.4 training materials from our company have a high quality, and we can make sure the quality of our products will be higher than other study materials in the market.

FCP_FGT_AD-7.4 Top Questions: https://www.ipassleader.com/Fortinet/FCP_FGT_AD-7.4-practice-exam-dumps.html

Report this page